These little clamshell tea light candles will burn brightly for 10-20 minutes. They’re a great way to use clamshells left over from summer cookouts.

You will need:

Empty clamshells halves
Beeswax or another type of wax
Double boiler or two pans
Wicking
Newspaper

To begin, cover your work area with newspapers, as this is a messy craft. Soak the clamshells in warm water, then vigorously scrub them out to remove any clam residue. When the shells have dried, place them on a flat surface to see how well they set. Most of them will lean forward a bit, but try to use the flattest shells as they will hold more wax.

I always use beeswax for these candles as it is the longest burning and it is easy to wick once it begins to cool. However, other waxes can be substituted for beeswax.

Melt beeswax in a double boiler. If you don’t have a double boiler,  this can be easily done by placing a pan of water beneath the pan with the wax. Melting wax this way is a safety method, as it keeps the heat  from directly hitting the wax. Beeswax is highly flammable so do not leave it unattended even for a minute. If it begins to smoke, remove the pan from the heat immediately. Keep a lid handy in case the wax does catch fire. The lid can be used to quickly smother the flames.

Once the wax has completely melted, remove it from the burner and let  it cool for 1.5 minutes. If you wish to add color, now is the time to  do so. You can also add scent after the color, but it is usually not  necessary with beeswax as it bears a natural honey scent.

Measure a length of wicking 1 inch for each shell candle you have. i.e. 12 candles is a 12 inch wick. Dip the wick into the wax, completely covering it, then set aside and let it cool.

Fill each clamshell to the brim with beeswax, taking care not to  overflow it. While the beeswax is cooling, cut the wax covered wicking into 1 inch sections.

When beeswax cools, the bottom and the sides are the first to harden. Watch the shells carefully and when the wax at the edges has hardened  about 2 millimeters from the edge, place a piece of one-inch wick into the liquid center. Let go and the wick should stand on its own. Repeat with the remaining shell candles.

After 4 hours, the candles should be cooled completely. At that point, they can be lit or saved for another special occasion.

By Amber Reifsteck, The Woodland Elf

The information provided on this website is for general information purposes only. If you choose to rely on the information on this website, you do so at your own risk and you assume responsibility for the results. (Full disclaimer here)

Enjoy this post? Click here to subscribe by email and get new posts delivered to your inbox.

Ads by Google